Wireless Products Network Products Hardware Products
Network Products
Cable
Cat5e UTP Cable
Specification Category 5e
Frequency 100 MHz
Attenuation (Min. at 100 MHz) 22 dB
Characteristic Impedance 100 ohms ± 15%
NEXT (Min. at 100 MHz) 35.3 dB
PS-NEXT (Min. at 100 MHz) 32.3 dB
ELFEXT (Min. at 100 MHz) 23.8 dB
PS-ELFEXT (Min. at 100 MHz) 20.8 dB
Return Loss (Min. at 100 MHz) 20.1 dB
Delay Skew (Max. per 100 m) 45 ns
 
Cat6 UTP Cable
Specification Category 6
Frequency 250 MHz
Attenuation (Min. at 100 MHz) 19.8 dB
Characteristic Impedance 100 ohms ± 15%
NEXT (Min. at 100 MHz) 44.3 dB
PS-NEXT (Min. at 100 MHz) 42.3 dB
ELFEXT (Min. at 100 MHz) 27.8 dB
PS-ELFEXT (Min. at 100 MHz) 24.8 dB
Return Loss (Min. at 100 MHz) 20.1 dB
Delay Skew (Max. per 100 m) 45 ns
 
  Cat5e STP Cable
Specification Category 5e
Frequency 100 MHz
Attenuation (Min. at 100 MHz) 22 dB
Characteristic Impedance 100 ohms ± 15%
NEXT (Min. at 100 MHz) 35.3 dB
PS-NEXT (Min. at 100 MHz) 32.3 dB
ELFEXT (Min. at 100 MHz) 23.8 dB
PS-ELFEXT (Min. at 100 MHz) 20.8 dB
Return Loss (Min. at 100 MHz) 20.1 dB
Delay Skew (Max. per 100 m) 45 ns
 
Information Outlets
UTP Cat-5
Channel Performance Specifications exceed not only the TIA 568B.2 & ISO 11801 Edition 2 for Category 5e/Class D cabling systems but also are capable of providing stable and continual performance upto 200 Mhz..
 
UTP Cat-6
Channel Performance specifications exceed not only the TIA 568B.2-1 & ISO 11801 Category Class E cabling systems but also are capable of providing stable and continual performance up to 500 MHz.
 
Surface Mount Box
• CAT5e rated
• Universal TIA/EIA 568A or TIA/EIA 568B Wiring specification
• PC Board Construction
• 110 and Krone terminations
 
  RJ-45 Connectors
The RJ-45 connector is commonly used for network cabling and for telephony applications. It's also used for serial connections in special cases. Here's a look at it: Although used for a variety of purposes, the RJ-45 connector is probably most commonly used for 10Base-T and 100Base-TX Ethernet connections.
 
Patch Cords
Straight
Connects any CAT5 or CAT6 application such as computer to hub, patch panel or wall jack. This PVC stranded patch cord meets TIA/EIA 568A specifications, and support all CAT5 & CAT6 high speed applications such as 1Gig and 10GigEthernet.
 
Cross Over
Connects any CAT5 or CAT6 application such as computer to computer, hub to hub or any applications where crossover pinout is required. This PVC stranded patch cord meets TIA/EIA 568A specifications, and support all CAT5 & CAT6 high speed applications such as Giga-Ethernet.
 
Patch Panels Modular UTP
• Meets or exceeds Category 5e requirements in TIA/EIA-568-B and Class E requirements in ISO/IEC 11801-B
• Panels contain both Universal T568A and T568B Wiring Configurations White IDC 110 punch down modules
• Color-coded front window labeling for easy port identification
• Termination standoff for optional grounding
• Panels have a universal T568A and T568B wiring card for 110 style IDC Terminations
• Mounts on a standard 19" equipment rack
 

Patch Panel Keystone UTP

• Meets or exceeds Category 5e requirements in TIA/EIA-568-B and Class E requirements in ISO/IEC 11801-B
• Panels contain both Universal T568A and T568B Wiring Configurations White IDC 110 punch down modules
• Color-coded front window labeling for easy port identification
• Termination standoff for optional grounding
• Panels have a universal T568A and T568B wiring card for 110 style IDC Terminations
• Mounts on a standard 19" equipment rack
 
OPTICAL FIBER PRODUCTS
Single Mode Fiber
 
Multi Mode Fiber
 
SM SC Connectors
Singlemode Fiber Optic Cable Assembly Specifications
Connector / Polish
Insertion Loss
dB @ 1300nm

Reflectance
dB @ 1300 nm

Ferrule Material
Typical
Max.
Typical
Max.
ST / PC
0.25
0.35
<=-50
<=-45
Ceramic
ST / UPC
0.25
0.35
<=-57
<=-55
Ceramic
SC / PC
0.25
0.35
<=-50
<=-45
Ceramic
SC / UPC
0.25
0.35
<=-57
<=-55
Ceramic
SC / APC
0.25
0.35
<=-65
<=-60
Ceramic
LC / PC
0.25
0.35
<=-50
<=-45
Ceramic
LC / UPC
0.25
0.35
<=-57
<=-60
Ceramic
MT-RJ / PC
0.25
0.35
<=-50
<=-45
Ceramic
MT-RJ / UPC
0.25
0.35
<=-57
<=-60
Ceramic
FC / PC
0.25
0.35
<=-50
<=-45
Ceramic
FC / UPC
0.25
0.35
<=-57
<=-55
Ceramic
FC / APC
0.25
0.35
<=-65
<=-60
Ceramic
General Specifications
Maximum tensile load
100 N/cm
Loaded min. bend radius
5 cm
Unloaded min. bend radius
3 cm
Crush resistance
750 N/cm
Impact resistance
1000 cycles
Flex resistance
7500 cycles
Multimode Fiber Optic Cable Assembly Specifications
Connector
Insertion Loss
dB @ 850 nm

Ferrule Material
Typical
Max.
ST
0.3
0.5
Ceramic
SC
0.3
0.5
Ceramic
MT-RJ
0.3
0.7
Thermoplastic
LC
0.3
0.5
Ceramic
FC
0.3
0.5
Ceramic
 
 SC SM Duplex Connectors
 
MM SC Connectors
 
 
SM ST Connectors
 
 
MM ST Connectors
 
 
LC Connectors
 
 
SM SC Adaptor
 
 
SM ST Adaptor
 
 
Patch Cord SC-SC
 
 
Patch Cord SC-LC
 
 
Patch Cord SC ST
 
 
Patch Cord SC-MTRJ
 
 
Patch Cord ST-ST
 
 
Patch Cord ST LC
 
 
Patch Cord ST MTRJ
 
 
Patch Cord LC LC
 
 
Media Convectors
Single Mode
Features
• Complies with IEEE 802.3, 802.3u,
802.3x standards
• Converts between UTP cabling and Fiber
Optic cabling
• One RJ-45 connector, Auto-MDI/MDIX* for UTP port
• Supports 10/100 Mbps Auto-negotiation for UTP port
• Fiber cabling connectivity up to 60Km
• Uses store-and-forward switching to separatecollision domains
• One fiber connector (SC/Single Mode, SC orST/Multi-Mode) for 100Base-FX
• Prevents packet loss by supporting backpressure& flow control
• Four DIP-switches for operation mode setupand Link-Loss Forwarding function
• Per port LEDs for diagnosis and maintenance
• External DC power adapter, 5V/2.5A
• Can be mounted in chassis or used
as stand-alone
• FCC Class A, CE Mark certification
 
Multi Mode
Features
• Complies with IEEE 802.3, 802.3u,
802.3x standards
• Converts between UTP cabling and Fiber
Optic cabling
• One RJ-45 connector, Auto-MDI/MDIX* for
UTP port
• Supports 10/100 Mbps Auto-negotiation for
UTP port
• Fiber cabling connectivity up to 60Km
• Uses store-and-forward switching to separate
collision domains
• One fiber connector (SC/Single Mode, SC or
ST/Multi-Mode) for 100Base-FX
• Prevents packet loss by supporting backpressure
& flow control
• Four DIP-switches for operation mode setup
and Link-Loss Forwarding function
• Per port LEDs for diagnosis and maintenance
• External DC power adapter, 5V/2.5A
• Can be mounted in chassis or used
as stand-alone
• FCC Class A, CE Mark certification
 
4 panel Wall Mount Fiber Termination Box
4 panel wall mount fiber distribution box.
Supports up to 4 Standard Adapter panels with 6, 8 or 12 fiber terminations.
Box Dimentions: 11.5"H x 13"W x 3.5"D

 
4 panel Rack Mount Fiber Termination Box
Features:
• Durable steel construction
• Available in Black powder coated finish for scratch and corrosion resistance
• Universally mountable with reversible mounting brackets
• Swing out or slide out main panel design for greater access to connectors and splices
• Patching and splicing capabilities
• Removable front panel for increased access

 
Network Racks

6 U Wall Mounting Rack
The "Ready to use" enclosures it more easy for Customers. The sleek look with sturdy construction and vents for air circulation means that these enclosures can be used for various wall mounting application.

It enables easy mounting of the components to fit into your applications. From consistent Steel profiles to precision-engineered panels with the highest tolerances for fit and finish in the industry, the racks are simply the finest Indian modular racks available; in big range of sizes for single- and baying applications.

The Networking racks come with front glass door, rear door and side covers partially perforated for cross flow of ambient air. The recess rails give flexibility of placing the 19" channels from front to rear at a pitch of 25mm.
We provides 6U, 9U, 12U, 16U, 36U racks.


 
Switches : We provides Managed & Unmanaged LAN Switches & Also provides KVM switches
Unmanaged Switch
TECHNICAL SPECIFICATIONS
*** • General
Standards • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper)
• IEEE 802.3u 100BASE-TX Fast
• Ethernet (twisted-pair copper)
• IEEE 802.3ab 1000BASE-T Gigabit
• Ethernet (twisted-pair copper)
• ANSI/IEEE 802.3 NWay auto-negotiation
• IEEE 802.3x Flow Control
Protocol CSMA/CD
Data Transfer Rates •Ethernet: 10Mbps (half-duplex) 20Mbps (full-duplex)
• Fast Ethernet: 100Mbps (half-duplex) 200Mbps (full-duplex)
• Gigabit Ethernet: 2000Mbps (full duplex)
Topology • Star
Network Cables • 10BASE-T: UTP Cat. 3, 4, 5 (100 m max.) EIA/TIA-586 100-ohm STP (100 m max.)
• 100BASE-TX, 1000BASE-T: UTP Cat. 5, Cat. 5e (100 m max.) EIA/TIA-568 100-ohm STP (100 m max.)
Number of Ports • 10/100Mbps port x 24
•10/100/1000Mbps port x 2
Media Interface Exchange • Auto MDI/MDI-X for each port
Twisted-pair Rx Reverse Polarity • Auto-correction for each port
Status/Diagnostic LEDs • Per device: Power
• Per port: Link/Activity 100Mbps speed (10/100Mbps ports) 100Mbps, 1000Mbps speeds (10/100/1000Mbps ports) Status
*** • Performance
Transmission Method • Store-and-forward
Switch Fabric • Non-blocking
• 8.8Gbps
Filtering Address Table • 8K entries per device
MAC Address Learning • Automatic update
Packet Filtering Rates • 10BASE-T: 14,880 pps per port (half-duplex)
• 100BASE-TX: 148,810 pps per port (half-duplex)
• Gigabit Ethernet: 1,488,100 pps per port
Packet Forwarding Rates • 10BASE-T: 14,880 pps per port (half-duplex)
• 100BASE-TX: 148,810 pps per port (half-duplex)
• Gigabit Ethernet: 1,488,100 pps per port
RAM Buffer • 320KBytes per device
*** • Physical & Environmental
Power Supply • 100 - 240 VAC, 50/60 Hz 0.3A Internal universal power supply
Power Consumption • 15.68 watts
Ventilation • 40 x 40 mm DC fan x 1
Operating Temperature • 0 -40 C (32 -104 F)
Storage Temperature • -10 -70 C (12 -158 F)
Humidity • 5% - 90% RH non-condensing
Dimensions • 440 (W) x 200 (D) x 44 (H) mm (17.3 x 7.8 x 1.73 inches) 19-inch rack-mount width, 1 U height
Weight • 2.8 kg (6.17 lb.)
Emission (EMI) • FCC Class A
• CE Class A
• VCCI Class A
• C-Tick
Safety • CUL
We provide 8, 16, 24, 48 port Unmanaged Switches
 
Managed Switches
TECHNICAL SPECIFICATIONS
DES-3526 • (24) ports 10/100BASE-T plus 2 Combo 10/100/1000Mbps Copper/ SFP ports* with optional redundant power supply
MAC Address Table Size • 8,000
Switch Fabric • 8.8Gbps switching capacity
Transmission method • 802.1d, 802.1w and 802.1s support
VLANs • Supports up to 255 Dynamic/ 64 Static VLAN groups (Port-based, Asymetric Port Based, 802.1q and GARP/GVRP)
Access Control Lists • L2/L3/L4 filtering rules based On MAC address, IP Address, 802.1p, DSCP, TCP/UDP payload, and/or TCP/UDP port numbers
Link Aggregation • 802.3ad and LACP support
Port Security • Port lock down to MAC Address
IGMP Snooping • Supports up to 128 L2 Multicast Groups
Interface • 10/100BASE-TX Ports: 24
• Combo 10/100/1000BASE-T Ports/SFP Slots: 2
• Auto-Negotiation of Network Speeds (RJ-45 Ports): Yes
• Auto-MDI/MDIX (RJ-45 Ports): Yes
• RS-232 Console Port: Yes
Power • Internal Power Supply: DC to DC
• Power Input: 100 to 240VAC, 10A, 50 to 60Hz
• Power Output: 12VDC, 5A (max.)
• Power Consumption: 23 watts (max.)
• Optional Redundant Power Supply: Yes
Performance • Switching Capacity: 8.8Gbps
• Max. 64-Byte System Packet Forwarding Rate: 6.6Mpps
• MAC Address Table: 8 K
• Packet Buffer Size: 16MB
Diagnostic LEDs • 10Mbps or 100Mbps Speed (Per Ethernet Port): Yes
• 10/100Mbps or 1000Mbps Speed (Per Gigabit Port): Yes
• Link/Activity (Per Port): Yes
• Power, Console, RPS (Per Device): Yes
Physical/Environmental • Ventilation DC Fans: 40 x 40 mm x 1
• BTU/Hr.: 73.8
• Dimensions: 441 x 207 x 44 mm
• Size: 19-Inch Standard Rack- Mount Width, 1U Height
•Weight: 2.56 kg (5.64 lbs)
• Operating Temperature: 0 to 40 C
• Storage Temperature: -40 to 70 C
• Humidity: 5 to 95% Non-Condensing
•EMI: FCC Class A, CE, C-Tick
• Safety: CSA International
• MTBF: 53,838 Hours
• Acoustic (Refer to ISO-7779): < 34dB
SOFTWARE FUNCTIONS • VLAN: IEEE 802.1Q Tagged VLAN, Port-based VLAN, GARP/GVRP, Maximum number of VLANs per device: 255 VLANs (static and dynamic combined)
• Priority Queues (CoS): Standard: IEEE 802.1p, Number of queues: 4
• Traffic Classification (CoS): Can be based on user-definable application types - TOS - Diffserv (DSCP) - Port-based - MAC address - IP address - TCP/UDP port number
• Access Security: Port security (64 MAC addresses max.), 802.1x port-based access control, 802.1x MAC-based access control, SSH v.1, v.2, SSL, Per port traffic segmentation, IP-MAC-Port binding: 512 entries
We provide 24, 48 port Managed Switches
 
KVM Switch
TECHNICAL SPECIFICATIONS
Computer Control • 16
Display Indicators • 1 Bank LED
1 Port LED
Console Connectors • Keyboard: 6-pin Mini-DIN Female PS/2
• Mouse: 6-pin Mini-DIN Female PS/2
• Monitor: 15-pin HDDB Female VGA, SVGA, XGA, MultiSync
Monitor Resolution Support • Up to 1920 x 1440
Switching Control • Hot Keys
• Push Buttons
• On Screen Display
Switching Notification • Audio Beep
Scanning Interval • 5-99 sec
Power • 12V 1A AC Adapter
Dimensions • Length 16 in (406 mm)
• Width 9 in (229 mm)
• Height 3.25 in (83 mm)
• Weight 123oz (3.5kg)
Rack Mount • 19" RackMountable. Kit Included
Cascade Port • 1 Daisy Chain Port to Cascade
Up to 8 Server Computers
Operating Temp • 32ºF to 122ºF (0ºC to 50ºC)
Diagnostic LEDs • 10Mbps or 100Mbps Speed (Per Ethernet Port): Yes
• 10/100Mbps or 1000Mbps Speed (Per Gigabit Port): Yes
• Link/Activity (Per Port): Yes
• Power, Console, RPS (Per Device): Yes
Storage Temp • -4ºF to 140ºF (-20ºC to 60ºC)
Operating Humidity • 0% to 80% Non-Condensing
Storage Humidity • 0% to 80% Non-Condensing
Certifications • FCC, CE
Minimum Requirements • Console
• One VGA, SVGA, or Multisync Monitor
• One PS/2 Keyboard
• One PS/2 Mouse
Computers • One VGA, SVGA, or MultiSync Video Card or Port
• One PS/2(6-pin Mini-DIN) Mouse port
• One PS/2((6-pin Mini-DIN) Keyboard port
We provides 8,16 port KVM Switches